Eureka
Home Advertise Magazine Events Eureka TV Directory
  


Subscribe

3D graphics prove feasibility of iceberg project
25/11/2010 Email to a friend   Comment on this article
Using 3d modelling, Dassault Systèmes has undertaken an indepth study of the feasibility of towing a large iceberg from Greenland to the Canary Islands to provide fresh water.

3D graphics prove feasibility of iceberg projectConsidering that icebergs are already towed for short distances to prevent them damaging Arctic oil platforms, the idea may not be as implausible as it must have seemed when Dr Georges Mougin and others first suggested it 40 years ago.

So good and realistic are the 3D graphics that these have been used as a the basis of a full length documentary about the project made by Jean-Michel Corillion, which is to be shown on mainstream German and French television and which was previewed at Dassault Système's just held 'European Customer Forum'.

In order to be feasible, the study showed, the initial iceberg should be fairly large – the candidate iceberg chosen weighed 7 million tonnes, and stable in the water, leading to choice of an iceberg that is table topped, or 'tabular' in the words of glaciologists. To reduce melting losses, it would need to be surrounded by a geotextile drop down skirt, and to avoid problems resulting from fracture, it would need to be towed using a very large Tuna fishing net. To be economical, only a single, commercial tug would be used with a modeled towing force of 130 tonf, to keep it in a natural drift current with an average speed of 1.5km/h. Energy consumption might be reduced by use of additional 'SkySails' developed to assist oil tankers and also already in service, although the possible effect of these was not included in the modeling calculations. Even allowing for storms, which were modeled in detail, it should complete the 3,500km voyage in 141 days, with more than 4 million tonnes of the ice still intact, for a total fuel consumption of about 4,000 tonnes.

Russian nuclear powered icebreakers have been constructed that have more than six times the driving power of the French MV Argonaute used as the basis of the simulation, and could potentially deliver larger icebergs, losing a smaller proportion of water to melting on the way, without producing any greenhouse gases.

80% of fresh water currently used in the Canary Islands is produced by expensive to run desalination plants. The tools used for the modeling, are all standard products now offered by Dassault Systèmes commercially. More about these and others will be revealed in the January 2011 edition of 'Eureka'.
.
 
Author
Tom Shelley
 
 
Supporting Information
http://perspectives.3ds.com/tag/simulation/
http://www.skysails.info/english
 
This material is protected by Findlay Media copyright 2012.
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.
 
Bookmark this article using:
 
Del.icio.us digg reddit Facebook StumbleUpon
 
 
Your comments / feedback
 
Added: 26/11/2010 | 08:45
 
Hi Tom, many thanks for referencing 3D Perspectives as a source. As we'll be adding other stories to the simulation category, if you'd like people to go to the iceberg article please provide this link: http://perspectives.3ds.com/environment/turning-icebergs-into-drinking-water/

We'll be adding more articles about this story in the coming weeks.

best, kate
 
Posted by:
 
Report Abuse
 
Added: 19/12/2010 | 21:08
 
I am a scinece-Journalist looking urgently (!) for grafics/photos etc. concerning the iceberg transporation project.
Could you please send as soon as possible all available grafics/photos etc.
Thank you very much in advance.
Yours sincerely

Joseph Scheppach

Gong - Wissen
Gong Verlag GmbH
Münchner Straße 101/09
85737 Ismaning
Tel. 089/27270 - 7458
mobil: 0178-5122394
E-Mail: freier_mitarb_02@gong-redaktion.de



 
Posted by: Joseph Scheppach
 
Report Abuse
Do you have any comments or feedback on this article? Please contact us by filling in the form below.
NameHide name
Your Email Address
Comments
Send
Your comments/feedback may be edited prior to publishing. Not all entries will be published.
Terms and Conditions

To comment on news stories or blogs you need to complete our 60 second registration process. Once completed this then allows you to download any and all white papers, register for e-zines and access our detailed supplier directory for FREE.

If you are all ready a registered user then enter your e-mail address and login.

You will need to have logged in prior to entering your comments in the boxes provided.

Please enter your email address to login and gain free access to this site.
 
If you are using this site for the first time registration is quick and completely free.
 
Register Now - Register Now


Email Address :  

Remember Me: - If this box is ticked you will be automatically logged in when you return.

Important: To protect your privacy, do not select 'Remember Me' if other users have access to the computer you are using.

View Privacy Policy
 
Related Companies
Dassault Systemes
 
 
Related News
Virtalis wins £2.2million STFC Contract
 
Dassault Systèmes launches Isight 5.6
 
Infinite Z unveils 3D design platform
 
Free Autodesk app lets users convert photos into 3D models
 
Autodesk software enables design of hybrid trike concept
 
 
Related Technology
A sense of realism: How the virtual world is being increasingly exploited for engineering advantage
 
Sponsored story: CAD and PLM – The next 30 years
 
Are you trusting to luck?
 
Software takes the virtual track to safety
 
The human face of design
 
 
Related Videos
Lighting Reality speed test video
 
3DVIA Introduces Innovative 3D App for the iPhone