14/03/2011 ARPRO performance enables stronger solutions ARPRO FR can be used in even more industrial applications within the construction and electrical devices sectors. The benefit of ARPRO FR is to extend the possible applications where its light weight ...
14/03/2011 New linear motion guide bearing Aimed at cost-sensitive applications across industrial automation, including pick and place, materials handling, packaging equipment and transport technology, the new 400-Series ball profile linear ...
10/03/2011 Small bevel gearboxes Precision engineered components manufacturer Ondrives has added a new series of small bevel gearboxes to its range of gear reducers.
28/02/2011 Wireless control range enables flexible location of thermostats JG Speedfit has launched a new range of under floor heating products, including a wireless heating control system, an overlay heating system (which can be installed on top of existing flooring) and a ...
28/01/2011 Lubrication technology from SKF SKF's Flowline circulating oil lubrication system has been developed for use in heavy industrial applications. According to SKF, the new system presents a new alternative to traditional lubrication ...
26/01/2011 Ondrives’ Delrin and Peek precision gears Ondrives has introduced a new range of Delrin POM and Peek Gf30 precision spur gears into its precision gear range of products.
26/01/2011 Self priming mag drive pump range from Michael Smith Engineers The Finish Thompson SP series of magnetic drive, self priming centrifugal pumps has been extended to include two new models, the SP10 and SP22. The pumps are said to provide maximum flow rates of 12 ...
21/01/2011 Ondrives’ skive hobbed gears Ondrives has added a new range of skive cut gears to its precision spur gear range. According to the company, the devices are processed in a different way to standard cut gears as they are gearcut ...
17/01/2011 Nord drive solutions from 20,000 to 200,000Nm Nord Gear has extended its portfolio of industrial power transmission systems with the addition of new drive solutions offering torques between 20,000 and 200,000Nm.
14/01/2011 Materials for linear drives By selectively combining various additives such as carbon fibres and incorporable lubricants with different base polymers, LUVOCOM engineers have succeeded in developing plastics capable of ...
10/01/2011 Wide base translation stage launched Aerotech has launched a wide base version of its ABL1500 air-bearing linear translation stage for high precision positioning of heavy and offset loads or as a base for X-Y systems where maximum ...
05/01/2011 Six layer tooling design meets peak auto performance Extrusion tooling manufacturer, Guill Tool & Engineering has announced a new six layer head/die for automotive applications.
08/12/2010 Single axis motor with coolStep The TMCM-1180 available from Micromech is an intelligent stepper motor, single axis controller/driver module using the new outstanding coolStep technology for sensorless load dependent current ...
08/12/2010 Driver IC for fan and blower applications The new A4941 from Allegro MicroSystems Europe is a three-phase, sensorless, brushless DC motor driver IC designed for fan and blower applications in the white goods and office automation sectors.
25/11/2010 Magnum Monosteel piston Federal-Mogul has designed the new Magnum Monosteel Piston in an attempt to offer improved fuel economy and reduced emissions for heavy duty vehicles.
24/11/2010 Drive solutions offer economical solution says Redex New drive solutions from Redex Andantex are said to simplify turning table mechanical transmission systems and offer a more economical solution.
16/11/2010 Wear protect thrives in tough applications A range of engineering compounds for demanding applications
16/11/2010 T-Conductive gives improved thermal conductivity A range of special compounds with improved thermal conductivity
15/11/2010 Renewably-sourced performance polymers Offering the potential for designers to reduce environmental impact
15/11/2010 BPA-free clear alternatives to polycarbonate An alternatives to traditional materials such as polycarbonate, PMMA, PET and clear ABS.
12/11/2010 Ariel specifies Zircotec’s coloured ceramic coating The first OEM application of Zircotec's Performance ColoursM ceramic exhaust coating, which offers both a highly aesthetic and effective thermal barrier.
12/11/2010 Stanyl for LED lighting applications A new robust and reliable connection system for use in high reliability and harsh environments for wire-to-board applications.
12/11/2010 SABIC expands random copolymer PP grades Two new random copolymer PP grades for cast film and biaxially oriented polypropylene (BOPP) film applications...
12/11/2010 New ABS material from BASF Terluran BX 13074 has been designed for plumbing fixtures, the household sector and automotive construction.
14/03/2011