Portable high precision sensor measurement tool
Burster's TRANS CAL 7281 is available in the UK from Ixthus Instrumentation. The TRANS CAL 7281 is a hand-held portable test and calibration tool for sensor components used on equipment such as hydraulic presses, torque tools, precision measuring devices and pressure-regulating systems on assembly lines.
The instrument can be powered from the mains or by battery and supports strain gauge/normalised signal and potentiometric sensors; it also includes a strain gauge simulator up to 50mV/V. Combined with a reference sensor the device provides a precision reference measurement chain for force or torque. The compact instrument can also be used for routine testing to measure and record isolation resistances and I/O resistances, and as a fault-finding tool for service engineers.
The TRANS CAL 7281 can store up to sixteen programs and has a data logging capacity of 30,000 measurements which can be shared and transferred to a PC with Burster's DigiCal configuration and data-acquisition software.
A dedicated version for reference measuring chain of compression load from 20N to 100kN with DKD/DAkkS calibration certificate is also available. The 72-REF-EN version uses the featured 7281 for the calibration of press-fit force measuring equipment and is typically used with Burster's high precision 8527 series sensor and is supplied with all connection cabling and DigiCAL PC software.
This material is protected by MA Business copyright
see Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the